Aireddown Adventures
1st Gen Toyota Sequoia Rear Bypass Lever
1st Gen Toyota Sequoia Rear Bypass Lever
Couldn't load pickup availability
**All orders ship same day or next business day**
1st gen Toyota Sequoia rear hatch bypass lever that mounts directly to the latch mechanism where the original cable hooks up. This lever bypasses the factory handle and cable, still locks and unlocks as normal (as long as the lock actuator is still in proper working order). Each handle is coated in a with rubberized coating.
Installation Videos
https://youtu.be/GZzD9oTPVpA?si=2TXYXkSdM6Ny-95t
Each kit includes
Aluminum Lever
Mounting hardware
Aireddown Adventures decal
Lifetime Warranty
Hassle free warranty, if you have a failure with your bypass lever we will send you a replacement!
Ships Free in the USA.
Disclaimer
The latch mechanism and lock actuator could also be in need of replacement due to normal wear and age. Please inspect both prior to installation of this kit.
When inspecting the latch mechanism inspect the inner latch to make sure the metal latch still has its plastic coating. This coating can cause the latch to stick/rattle as the plastic coating comes apart over time. When the latch sticks it can cause issues with the lock actuator not being able to lock/unlock.
When inspecting the lock actuator listen closely to the rear latch area while lock/locking the doors. Best way to inspect the lock actuator is to pull the latch mechanism out of the door and keep the big plug to the actuator connected and the small plug disconnected, then visually inspect the lock/unlocking sequence.
Best to replace the latch and lock actuator at the time of the Bypass Lever installation for best results and longevity. We always recommend OEM latch and lock actuator if possibly.
OEM part numbers
69301-0C010 Latch mechanism
69150-0C010 Actuator assembly
